| Last Modified: 11-29-2007 | 1.6 A | |
| Service Category: Vehicle Exterior | Section: Exterior Panels/Trim | |
| Model Year: 2008 | Model: Sequoia | Doc ID: RM0000023BY006X |
| Title: EXTERIOR PANELS / TRIM: BLACK OUT TAPE (for Rear Door): INSTALLATION (2008 Sequoia) | ||
INSTALLATION
1. INSTALL NO. 2 BLACK OUT TAPE
(a) Application precautions
.
(b) Clean the attachment surface (using an infrared light)
.
(c) Clean the attachment surface (using a tape removal disc)
.
(d) Apply new No. 2 black out tape to the positions shown in the illustration.
Installation Position:
|
Mark |
Measurement |
|---|---|
|
a |
2.0 mm (0.079 in.) |
|
b |
3.0 mm (0.118 in.) |
|
c |
1.0 or less (0.039 or less in.) |
2. INSTALL REAR DOOR GLASS RUN
HINT:
Use the same procedure as for the RH side
.
3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY
HINT:
Use the same procedure as for the RH side
.
4. INSTALL REAR DOOR ARMREST BASE UPPER PANEL
HINT:
Use the same procedure as for the RH side
.
5. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG
HINT:
Use the same procedure as for the RH side
.
6. INSTALL REAR DOOR FRAME GARNISH
HINT:
Use the same procedure as for the RH side
.
7. INSTALL REAR DOOR GLASS OUTER WEATHERSTRIP
8. INSTALL REAR DOOR WINDOW FRAME REAR MOULDING
|
|